©Copyright Shenzhen Hehejin Industrial Co., LTD. All rights reserved. Site Map
EPever MT50 Remote Meter for Tracer AN Series Solar Charge Controller EPsolar MPPT PWM Real-Time Dispaly,Functions like the real-time monitoring of the operational data and working status of a controller,the setting of device parameters and load control parameters and the restoration of factory defaults, based on LCD display and functional key operation.
The new-generation remote display unit MT50 for LSxxxxB(P), VSxxxxBN and TracerxxxxBN(P) controllers is an associated display device which supports both the latest communication protocol and the voltage technology standard of solar controllers.
Automatic identify the controller, and display relevant parameter data
Large-screen informative LCD displays all the operating data and system working status
Simple and convenient operation
Real-time alarm of failure information
Longer communication distance based on RS485
Diversified load control modes : Manual Control, Light ON/OFF, Light ON+ Timer, Time Control
Battery type selection: Gel, sealed, flooded and User(programable)
Automatic identify and display the type, model and relevant parameter data of controllers;
Energy statistics display function
Real-time display the operational data and working status of the connection devices in digital, graphic and textual forms by a large-screen multifunction LCD;
Direct, convenient and rapid operation of six navigation function keys;
Both data and power flowing on the same lead, no need for external power;
Real-time data monitoring and remote load switchover of the controllers, and data browse and modification of device parameters, charge control parameters and load control parameters;
Real-time display and acoustic alarm of failure information of the connection devices;
Longer communication distance based on RS485.
Note: Battery voltage setting please in strict accordance with:
1. Over Voltage Disconnect Voltage > Charging Limit Voltage ≥ Equalize Charging Voltage ≥ Boost Charging Voltage ≥ Float Charging Voltage >Boost Reconnect Charging Voltage;
2. Over Voltage Disconnect Voltage > Over Voltage Reconnect Voltage ;
3. Low Voltage Reconnect Voltage > Low Voltage Disconnect Voltage ≥ Discharging Limit Voltage;
4. Under Voltage Warning Reconnect Voltage > Under Voltage Warning Voltage ≥ Discharging Limit Voltage;
5. Boost Reconnect Charging Voltage > Low Voltage Disconnect Voltage.
General safety information
■ Please inspect the MT50 thoroughly after it is delivered. If any damage is seen, please notify the shipping company or our company immediately. A photo of the damage may be helpful.
■ Read all instructions and cautions in the manual before starting the installation.
■ Keep the MT50 away from rain, exposure, severe dust, vibrations,corrosive gas and intense electromagnetic interference.
■ Do not allow water to enter remote meter.
■ There are no user serviceable parts inside the controller. Do not disassemble or attempt to repair it.
|Battery type||Sealed ||Sealed/Gel/Flooded/User|
Temperature compensation coefficient
Depends on the versions of
|Control voltage parameters|
Battery charging setting
Over voltage disconnect voltage
|16.0V 16.0V ||16.0V||16.0V||9~17V|
Charging limit voltage
Over voltage reconnect
Equalize charging voltage
Boost charging voltage
Float charging voltage
Boost reconnect charging voltage
Low voltage reconnect voltage
Under voltage warning
Under voltage warning voltage
Low voltage disconnect voltage
Discharging limit voltage
|Equalize duration||——||2 hrs. ||2 hrs.||0~3 hrs.|
|Boost duration||2 hrs.||2 hrs.||2 hrs.||0~3 hrs.|