PowMr 3500W Inverter 24V 220VAC with 100A MPPT controller

Features:

1.Pure sine wave inverter

2.Configurable input voltage range for home appliances and personal computers via LCD setting

3.Configurable battery charging current based on applications via LCD setting

4.Configurable AC/Solar Charger priority via LCD setting

5.Compatible to mains voltage or generator power

6.Auto restart while AC is recovering

7.Overload/ Over temperature/ short circuit protection

8.Smart battery charger design for optimized battery performance

9.Cold start function

10.Removable LCD control module

11.Communicate with RS-232(WIFI/GPRS Optional)

12.Configurable AC/PV Output usage timer and prioritization

12.Anti-dust kit(Optional)

The following illustration shows basic application for this inverter/charger. It also includes following devices to have a complete running system:Generator or Utility.PV modules.Consult with your system integrator for other possible system architectures depending on your requirements.This inverter can power all kinds of appliances in home or office environment, including motor-type appliances,such as tube light fan, refriaerator and air conditioner.

1. LCD display  

2. Status indicator 

3. Charging indicator

4. Fault indicator

5. Function buttons

6. Power on/off switch

7. AC input

8. AC output

9. PV input

10. Battery input

11. Circuit breaker

12. RS-232 communication port (WIFI /GPRS/ Removable box)

13. Removable box

INSTALLATION

1.1 Unpacking and Inspection

Before installation, please inspect the unit. Be sure that nothing inside the package is damaged.

You should have received the following items inside of package:

The unit x 1 User manual x 1 DC Fuse x 1 Ring terminal x 1 Strain relief plate x 1 PV wire cover x 1 Screws x 4 Dust cover x 1

1.2 Preparation

Before connecting all wirings, please take off bottom cover by removing four screws as shown below.

A Notice:Slowly remove wire cover.There is a communication cable connect to the main board

1.1 Mounting the Unit

Consider the following points before selecting where to install: Do not mount the inverter on flammable construction materials.Mount on a solid surface Install this inverter at eye level in order to allow the LCD display to be read at all times.3S For proper air circulation to dissipate heat, allow a clearance of approx. 20 cm to the side and approx. 50 cm above and below the unit.The ambient temperature should be between 0°C and 55°C to ensure optimal operation.The recommended installation position is to be adhered to the wall vertically.Be sure to keep other objects and surfaces as shown in the diagram to guarantee sufficient heat dissipation and to have enough space for removing wires.

MPS-V II  user manual.pdf