Efficient 60A MPPT Solar Charge Controller,Built-in Dedicated Wiring Terminals,Versatile Battery Compatibility,Efficient Three-Stage Charging Solar Controller
1. Features
1) Integrated charge presets
Integrated charge presets combined with adaptive charge logic are well suited for most common battery types, such as LiFePO4, Gel and flooded lead-acid.
2) Flexible Application
Compatible with 12V/24V/36V/48V system voltage.
3) Multi-stage charge algorithm
The multi-stage charge algorithm is specifically engineered to optimise each recharge cycle and charge maintenance over extended periods.
3) MPP Tracking Technology
The Maximum Power Point Tracking (MPPT) technology will track the array’s maximum power point voltage (Vmp) as it varies with weather conditions, ensuring that the maximum power is harvested from the array throughout the course of the day.
4) High efficiency
Innovative MPPT technology with high tracking efficiency up to 99% and peak conversion efficiency of 98%; resulting in lower power usage, less heat generated and cooler operation.
5) Adaptive boost charge
Adaptive boost charge monitors the battery’s response during initial charging and intelligently determines the appropriate boost charge duration for each individual charge cycle. This ensures that the battery is fully recharged regardless of the discharge level or capacity and avoids excessive time at the elevated boost charging voltage (that can accelerate battery aging).
6) Durable and safe
i. Limit the maximum charging current. Protect battery performance and prolong battery life.
ii. PV array short circuit protection.
iii. PV input overcurrent protection.
iv. Controller overload protection.
v. Load short circuit protection.
vi. PV reverse polarity protection. No damage to the controller will result.
vii. Battery reverse polarity protection.
viii. Over-temperature protection. If the temperature of the controller heat sink exceeds 65℃, the controller will automatically start reducing the charging current and shut down when
temperature exceeds 80℃.
7) Silent operation
Almost silent operation since there is no cooling fan or moving parts, cooling is via natural convection.
8) Lithium battery activation
Compatible with Li-ion (LiFePO₄) batteries; when the battery type parameter is set to Lithium battery the charge cycle settings are altered to suit. Moreover, when the connected lithium battery is in a protected state, the controller will activate the lithium battery using the energy from the solar panel with a current that does not exceed the lithium battery's protection voltage and current range. Warning: Do not charge Li-ion batteries if the battery temperature is below 0°C.
9) Enhanced User Interface with a Large Screen
The POW-M60-MAX features an expanded LCD display interface, significantly enhancing the user experience of the operating interface.
10) Built-in Dedicated Wiring Terminals
Convenient plug-and-play design saves approximately 60% of installation time. It greatly enhances wiring safety and completely avoids errors caused by reverse connection to the controller ports.
