©Copyright Shenzhen Hehejin Industrial Co., LTD. All rights reserved. Site Map
The Keeper MPPT Charge Controller 30A supports both 12V and 24V systems and can automatically identify system voltageonce connected to a Sealed, Gel, Li (NiCoMn) O2, and Flooded battery (manual setting is required for Lithium batteries).
Wiring Precautions
Step 1: Connect batteries
Step 2: Connect the load
Step 3 :Connect the solar panels
Step 4 :Connect the inverter to the battery
2. Notice
1). This series of MPPT ia a common positive controller, PV array,battery and load of thr positive pole can be grounded at the same time.
2). If the inverter of other staring current is loaded in the system, please connect the inverter directly to the battery.Do not connect with the controller's load terminal.
3). If the lithium battery is used, set the system voltage and the battery type before use.
